With our free design service our garden buildings are able to be customised to your
requirements. We will help design your perfect building providing a full project
package from start to finish.
Assembly Service, Gate Fitting & Removal
With many years experience, our expert assembly team will professionally assemble
and fit your garden building or gates for you with minimal disruption. Please contact
us for prices.
Our assembly team can also remove, take-away and dispose of your old garden building
and gates for a small charge. Please contact us for prices.
Base Laying
When fitting your building we require a level area on which to erect your building.
If we are to erect your building we provide three base options and the must suitable
will depend on building and your ground conditions.
Bearers-:
Bearers are the quickest and cheapest base solution. This base consists of laying
loose 3” x 3” tanalised bearers and must be placed onto a relatively level ground
and dry ground. The bearers are then levelled using wedges or packers. The tanalised
process protects the timber against rot and decay for a minimum of 15 years.
Ladderack-:
A Ladderack can be an alternative to a concrete base and has the benefits of being
strong yet cost effective and easy to remove. It is ideal if you have a large building,
slope or two uneven surfaces.
We create an outer frame using 3” x 2” tanalised timber screwed together. We then
attach struts along the frame for support. The Ladderack is then levelled using either
wedges or packers and in some cases where we may attach legs to the base. The Ladderack
must be placed onto relatively dry ground. In cases where the ground is collects
water, is soft or needs support we may need to concrete the legs into ground.
Concrete Base-:
A concrete base is our recommend and preferred option as it will provide a long-lasting,
stable and permanent base. We normally lay a 3” or 4” base upon membrane. We will
require kind access to a water supply when laying a concrete base. If there is a
significant slope of the ground, an extra charge may be incurred if extra materials
need to be used.
Insulation & Double Glazing
We can fully insulate your building to give you whole year-round use of your garden
building. Insulation is a essential addition providing comfort and protection especially
during the coldest winter months. We can provide a complete package including full
insulation of the floor, walls and roof. We can even provide double glazed units
for maximum energy efficiency and performance.
There are three grades of insulation to choose from - fibreglass, polystyrene and
high performance celotex type. If moisture is a concern we are also able to install
a membrane lining which helps prevent moisture and reduce condensation. Once insulated
the building must then be lined to protect and hold the insulation. We offer two
type of final lining either 9 mm plywood which can be plastered or painted at a later
date or T&G lining to match the exterior of the building. Insulation of your building
can be carried out with the assembly of your building for minimal hassle.